hass>current_meters

• finish mqtt integration
• sum the three current sensors to one link
• kill all our consumers and calculate the base (we share power with upstairs)
• remove (or integrate to ) the default energy tab
• integrate $/hour to the page

our current sensor is clamped onto our three main arteries and is streamed using rtl_433
running on the HomeAssistant “cloud” machine

push it to over mqtt, using

 sudo rtl_433 -F "mqtt://10.81.2.3:1883,user=tami,pass=tamispace"

and from there to the homeassistant

in hass, as our sensor does not conform to the standard power_w expected output.
a solution was found, and integrated to hass configuration.yaml

tl;dr add the following to the config/configuration.yaml
and reload the yaml (Developer Tools/yaml)

mqtt:
  sensor:
    - name: cc_power0
      state_topic: rtl_433/74930c0d-rtl433/devices/CurrentCost-TX/3202/power0_W
      device_class: power
      unit_of_measurement: W
      state_class: measurement
      value_template: "{{ value | round() }}"

    - name: cc_power1
      state_topic: rtl_433/74930c0d-rtl433/devices/CurrentCost-TX/3202/power1_W
      device_class: power
      unit_of_measurement: W
      state_class: measurement
      value_template: "{{ value | round() }}"

    - name: cc_power2
      state_topic: rtl_433/74930c0d-rtl433/devices/CurrentCost-TX/3202/power2_W
      device_class: power
      unit_of_measurement: W
      state_class: measurement
      value_template: "{{ value | round() }}"